BAHAI' NINE POINTED STAR
I made this as a wedding present for Shamim (my daughter in law's brother) and Stecha Deghanni. Have you ever tried to divide a circle into 9 parts - not an easy feat for us non math people. I used bevels to create the main part of the star and enhanced the piece using yellow and blue spirit glass.
I am very excited about making these two windows for Muir's living room at their family resort in Haliburton. It was quite a challenge to come up with a design that worked for a trapezoid that is 82 inches long; 4 inches high on one end and 20 inches high on the other. The design needed to flow. I spent several days mulling over different ideas and designs that might tie in with the wonderful view of lake and trees outside their huge living room wall of windows.
Window One shows features a modern crane at wider side with a ribbon and glob design flowing off to the smaller end of the trapezoid. This part of the design suggests water weeds and flowing water. Window Two features bonsai type branches at the wider side and the reverse of the ribbons and globs flowing off to the smaller end.
WINDOW ONE: CRANE DESIGN
Window One shows features a modern crane at wider side with a ribbon and glob design flowing off to the smaller end of the trapezoid. This part of the design suggests water weeds and flowing water. Window Two features bonsai type branches at the wider side and the reverse of the ribbons and globs flowing off to the smaller end.
WINDOW ONE: CRANE DESIGN
An irridescent baroque glass was chosen for the background of both windows, while the background for the two circles is done in an irridescent rain drop glass. The flowing ribbons are done in various textures of pastel colours. The large circles are rondels and each window has a clear faceted jewel in the large side circle. There are over 150 pastel globs representing water bubbles flowing through this piece and it took a huge amount of time to do the fitting around them.
I started with the tree design and worked to the end before choosing the blue glue chip for the border of the circle. When working the other window I found a piece of glass that had blues and the same wine colour as the tree so this worked perfectly for the bird. However there was too much blue here so I used a green gluechip for the border of the circle. It was quite a challenge choosing the various colours and textures but the finished product was lovely. The gobs and pastels worked well with the irridescent coating on the background glass.
CLOSE UP OF TREE AND BIRD DESIGN
BOTH WINDOWS INSTALLED
A VIEW FROM THE OUTSIDE
A VIEW OUT TO THE LAKE
The windows were very difficult to install due to their size and shape. The slightest twist would cause them to crack so I was very relieved when Arthur finally completed the installation and they fit and nothing cracked. It took over 150 hours to make these windows which were also hard to photograph due to the large area of differing natural light, trees in the background and window glare.
These windows have become the focal point that Pat's mom said just lights up the room!!!
KANJI FOR LOVE
This piece is a memorial gift for my friend Dawn Cobden in memory of her parents, Lloyd and Patricia Melindy who were killed in a car accident in the summer of 2010. This Kanji symbol representing the word "love", honours the love in Dawn’s family - agape as her mom was a Christian minister, sibling love which is there in abundance and the married love of a couple devoted to each other.
The project started with the clear blue-rust background glass which was a unique find. From this evolved the bright orangEy red glass chosen for the lettering. At this stage, even though the design only used two colours of glass, the piece needed more, so I added the clear ridged border, the green faceted jewel and corner pieces, then the outside blue border in water glass. Arthur made the pine frame.
BIRD OF PARADISE
Wedding Gift for Brooke and Jason Morden
This is a very elegant piece featuring a unique green-turquoise rippled glass in the leaves and pencil bevels in the border. The fairy is tucked in behind a gorgeous orange rondel. The clear baroque background glass sets off the design nicely. The white frame was made by my husband Arthur and sprayed by my daughter Amber at Elmira Kitchen and Baths.
|
LUA'S MOTHER'S DAY FAIRY
While working with Caitlin I made the fairy below, putting it into the oval as a Mother’s Day gift for Miranda for Lua’s new bedroom. Since the fairy had red hair, this unusual fractures and streamers glass works nicely for the background. |
LIFE OF "PI" FOR LUKE AND KEIR
I discovered the Tiger print at
someone’s house while playing bridge and
thought it would work out in stained glass one day. Well this is the year that
the animated version of “Life of Pi”came to the movie theatre and it was
amazing. Jean’s daughter Cyndi had given us some baby furniture and this was
the perfect way to thank her and celebrate her son’s Luke and Keir and their
new home. It was quite a challenge fitting all the teeth and grinding the
centre of the eyes out and working with the small black circles. Many types of
orange and yellow glass were used. The green glue chip was perfect to enhance
the ball the tiger is perched on and the turquoise water glass provides a
perfect back drop.
ART DECO TREE BRANCH IN TEXTURED CLEARS
This piece was a gift for Susan
Giesler’s 60h birthday- a gift from the Tuesday Discussion Bridge ladies. We sweated
over a pattern for months as Susan wanted something simple and classy. I adapted
the original pattern to incorporate rondels, globs and outside borders. It was
a big decision to use the pastel wine and turquoise glass in the globs, rondels
and borders rather than leave the piece all textured clears as in the pattern on the left.
***************************************
************************************
SAMPLE LINE
MAIN HEADING
SAMPLE TABLE TWO CELLS
put text here
|
put text here
|
SAMPLE TABLE ONE CELL
put text here
|
No comments:
Post a Comment